When using a
Adjust Bucket Angle
• Tilt the bucket to the optimal angle for the material and task. Angle forward to improve penetration when digging. Angle backward for grading with the bucket flat.
• Adjust the angle using the joystick controls in the cab. Set the angle before starting work.
• The proper angle provides the best orientation of the bucket for the job.
Control Digging Force
• Match the hydraulic force settings to the soil conditions. Use less force in soft material to avoid over-curling the bucket. Increase force for hard digging.
• Reduce the swing speed and sensitivity settings for precision control when needed.
• Adjust settings for smooth bucket operation to prevent jerking and banging during digging.
Use Proper Penetration Technique
• Approach the pile square on and penetrate the bucket fully into the material. Take small bites to utilize the full capacity.
• Penetrate at a slight angle to utilize the side teeth for slicing.
• Lift and dump the
Lift and Carry Loads Correctly
• Keep the boom tucked close to the cab and avoid lifting loads higher than needed for stability.
• Swing the boom slowly and smoothly with a loaded bucket to prevent shifting the load.
• Do not start or stop a swing suddenly with a suspended load.
Dump Material Properly
• Position the bucket directly over the truck or pile with adequate clearance.
• Completely open the jaws to dump the load without spilling from the sides.
• Close the jaws quickly after dumping to prevent material dripping.
Use Caution When Grading
• Angle the
• Avoid digging the cutting edge into the soil which will gouge the surface.
Prevent Bucket Damage
• Never use the GP bucket for prying objects, hammering, or scraping on rough terrain.
• Avoid severe impacts that can bend the bucket shape or damage teeth.
• Store buckets securely using retention devices when not in use.
Perform Regular Maintenance
• Inspect the bucket for cracks, missing teeth, and leaking cylinders regularly.
• Lubricate all bucket pivot points as specified.
• Sharpen or replace worn bucket teeth for optimal penetration.
By following these points of attention when operating a
Post time: Sep-08-2025
